User`s guide

User’s Guide Tensioning winder 30
18 AP-75104 - Rev 2.3 – 12/10/2011
Step 4 : Install the driving mechanism (1) onto the support bracket (2) and tighten the four screws (3).
1
2
3
The left bracket consists out of two parts.
Step 1 : Attach the closing bracket (1) to the stand (2).
Step 2 : When fixing the support bracket (3) to the closing bracket, make sure the support bracket is
positioned against the feet of the stand.
Step 3 : Fix the support bracket with 4 screws M4x10 to the closing bracket.
1
2
3