User`s guide

User’s Guide Tensioning winder 30

17 AP-75104 - Rev 2.3 – 12/10/2011

3 INSTALLATION PROCEDURE

3.1 INSTALLING THE FRONT TENSIONING SYSTEM

3.1.1 On a ValueJet 1304 / ValueJet 1324

The right bracket consists out of 2 parts.

Step 1 : Slide the closing bracket (1) over the stand (2). Make sure that the closing bracket is pushed

properly against the stand.

Step 2 : If the closing bracket is positioned properly, slide the support bracket onto the closing bracket.

Make sure that the support bracket its flange is properly positioned against the closing bracket

and the stand.

Step 3 : When it is positioned correctly, fix the support bracket (3) onto the closing bracket using 3

“M5x12” (4) screws.