User`s guide

Spitfire 100 Extreme series printers  Users Guide
97 AP-75194 - Rev. 2.2
6.2 OPERATION PANEL IN STANDBY MODE
Notes
For information of the name and function of each key, refer to "Operation panel".
6.2.1 [F1] – Feeding, Cutting media and Step Adjust
When you want to feed media forward or backward, follow the steps below:
Step 1 : Verify the following regarding the condition of the printer.
I) It is not currently printing
Step 2 : Press the [F1] key of the operation panel.
I) To shift to the Cut&Feed menu.
Step 3 : Press the [F3] key or the [F4] key.
I) The product will perform following operations:
Setup items Key name Parameters Description
Cut & Feed F1 Cut Cut media
F2 Dist.Adj. Set step
F3 Forward Feeds media forward.
F4 Backward Feeds media backward.
Notes
If "Take-Up Roll" is set in the media detection setup menu, the product will not operate even if
the [F4] key has been pressed.