User`s guide
Spitfire 100 Extreme series printers Users Guide
89 AP-75194 - Rev. 2.2
5.4 PRINTING FLOW
The following flowchart gives you a view on which steps should be taken to make a print.
SELECT MEDIA
(Refer to the media compatibility lists on www.mutoh.be)
LOAD MEDIA
(Refer to the chapter Loading Media)
PERFORM NOZZLECHECK AND CLEANINGS IF NECESSARY
(Refer to the chapter TestPrinting)
SET STEP
(Refer to chapter Set the correct distance adjust)
SELECT IMAGE
LOAD DEDICATED PROFILE
( )
AND RIP IMAGE
(Refer to profiles section on www.mutoh.be)
DECIDE WHICH WEAVING PATTERN SHOULD BE USED (SIGN/PICTURE)
(Refer to chapter i² technology)
PRINT IMAGE
It is highly recommended to use one of the profiles Mutoh is making available on the website. A lot of parameters are included.
The most important ones are:
Ink an colour management related
Ink Restrictions
Linearization
Ink limits
ICC Profile
PrintMode related
Resolution
Amount of passes
Unidirectional Bi Directional
Weaving ON OFF
Media related
Heater settings
Media thickness
HeadHeight
The file name of each profile is build up in the same way
For example