User`s guide

Spitfire 100 Extreme series printers  Users Guide
79 AP-75194 - Rev. 2.2
5.2 TESTPRINTING
Follow the steps below to do a test print and confirm if your printer operates correctly.
Step 1 : Switch the power ON and load the media.
Step 2 : Verify your printer is in normal status.
Step 3 : Press either the [MENU ] key or [MENU ] key.
The setup menu is displayed.
Step 4 : Press the [F3] key.
"TestPrint: SetupPrint" is displayed on the LCD.
Step 5 : Select an item and press the appropriate key.
Setup items Key name Parameters Descriptions
Test Print (1/3) F1 Setup Print a setup list
F2 Nozzle Check Print a NozzleCheck
F3 Adj. Uni-D Print a Uni-Directional adjustment pattern
F4 Adj. Bi-D Print a Bi-Directional adjustment pattern
Test Print (2/3) F1 Bi-D400 Print a Bi-Directional adjustment pattern at 400 cps
F2 Bi-D480 Print a Bi-Directional adjustment pattern at 480 cps
F3 Palette Print a colour palette
F4 Maintenance Print a maintenance record
Test Print (3/3) F1 Dist. Check Print a distance adjustment pattern
Step 6 : Print the information on the selected item.
Step 7 : After printing, the printer returns to the normal status.