User`s guide
Spitfire 100 Extreme series printers Users Guide
54 AP-75194 - Rev. 2.2
3.11.2 Starting up after a LongStore.
Step 1 : Go to menu 6/7 and choose TubingFlush.
Step 2 : Moist the edge of the caps with Solvent Cleaning Liquid to guarantee that the ink cycle is airtight.
Step 3 : Press the ENTER key when finished.
Step 4 : Remove the Spitfire Mild Solvent Cleaning Liquid cassettes and manually start a discharge cycle
for 15 seconds.
Go to the Ink Manager Menu > Charge/Discharge > set the following parameters in this order.
Handle following order
Select ALL with [F2] key
Press F1 to select ALL heads
Select Discharge with [F3] key
Press the F4 key to go to next menu
Set 15 seconds with [F2] [F4] and press
ENTER
Step 5 : A timer will start on the display.
When finished, the printer will go to its status screen automatically.