User`s guide
Spitfire 100 Extreme series printers Users Guide
51 AP-75194 - Rev. 2.2
3.10.2 Leave your printer IDLE during night.
In case you want to leave your printer IDLE during the night for some reason, a special procedure should be
followed.
Step 1 : Before leaving the office:
a. Set your AutoClean on 6 hours and powerful. This will perform a powerful cleaning every 6
hours.
b. Set your CapCycle to 7 hours. An hour after the cleaning, a tubing flush will be performed.
Step 2 : When arriving in the office, be sure to:
a. Perform a tubing flush with cleaning (Please refer to Daily Maintenance)
b. Perform a nozzle check
c. Depending on the amount of lost nozzles, perform a normal or powerful cleaning until all
nozzles are back.
d. Switch off the CapCycle and AutoClean feature.