User`s guide

Spitfire 100 Extreme series printers  Users Guide
39 AP-75194 - Rev. 2.2
3.4.4 Using media retainers.
Some media are fragile to cockling. When installing the media retainers at the edge of the media, the media
is kept down and the risk of head crashes and bad print quality is smaller.
Caution
Never use the media retainers when working in CutSheet mode or with a sheet.
Step 1 : Mount as well the left as right media retainer in the grooves. Always insert them from the left side
of the machine. Be sure the pins are correctly installed in the grooves.
Step 2 : Move the right media retainer to the far right side and the left media retainer to the most left side.
Step 3 : Install the roll media as explained in previous chapters.
Step 4 : After the initializing of the paper, shove the media retainers over the media edges.
Caution
Do not push the media retainers as far as possible over the media, otherwise the printed file
will go under the media retainer and will leave a mark.
The media retainer should not come further over the media as the minimum margin. This is 5
mm.
Step 5 : You are ready to print.
³¿®¹·² ±º ë ³³