User`s guide

Spitfire 100 Extreme series printers  Users Guide
37 AP-75194 - Rev. 2.2
HINT
To ease the winding up of the media on the front core, it is permitted to cut the media in a V-
shape.
Step 19 : Tighten the media straight to the core with tape.
Step 20 : After closing the front cover, the media initialize will start.
[F1]-key Lever UP
[F2]-key Browse through the different profiles for
media measurement
[F4]-key Start media measurement using the
selected profile in the lower left corner
Step 21 : Set the winder (FRONT) unit to ACTIVE. The front tensioning system will be activated.
Step 22 : Install the media retainers if necessary as explained in one of the next chapters.
Step 23 : Installation of the media is completed.
Notes
With a small intervention it is possible to reverse your winding direction. Mount the twist cable
between the control box and the front motorized unit cable.
1 Normal winding direction
2 Twisted motor cable attached