User`s guide

Spitfire 100 Extreme series printers  Users Guide
30 AP-75194 - Rev. 2.2
Step 6 : Make the correct settings and press the [F4]-key to start the media initialization.
Step 7 : If everything is done correctly, the following screen should appear.
Notes
If there are any problems during the initial start-up operation, the printer will display a message, and
the operation may stop. If the operation stops, refer to "Troubleshooting", and take the appropriate
actions.
Step 8 : Before start printing, be sure to perform a nozzle check to ensure all nozzles are present. If not,
perform the necessary cleaning cycles.
3.2 POWERING OFF
Notes
Please be sure to perform the necessary maintenance before powering OFF the machine. All details
can be found in chapter 4.
Step 1 : Verify the following regarding the operational condition of the printer:
There is no printing operation being performed.
The operation panel is in the main screen.
Step 2 : Press the [POWER] key of the operation panel to switch OFF the printer.
Step 3 : [Power OFF] will be displayed for a few seconds
Following message is displayed.
All lamps and the LCD of the operation panel will switch OFF.
The printer will automatically perform a Tubing Flush and power OFF.