User`s guide

Spitfire 100 Extreme series printers  Users Guide
24 AP-75194 - Rev. 2.2
2.2 INSTALLATION REQUIREMENTS
It is very important that the installation environment fulfils following conditions to obtain a good print quality.
2.2.1 Environment
Choose a place for printer installation following the requirements in the table below.
Dimension machine
Area (printer only) 3,915 m² (42 ft²)
Total weight
machine
Without media ± 500 kg (1100 Lb)
With media ± 600 kg (1430 Lb)
Maximum load on one wheel 200 kg (440 Lb)
Printer Winding System
Electrical Voltage
AC 220-240V AC 100-120V / AC 220-240V
Frequency 50Hz±1Hz 60Hz, 50Hz±1Hz
Capacity AC220V-240V : 12A AC100V-120V : 0.3 A
AC220V-240V : 0.13 A
Maximum capacity 2500 Watt
In order to protect the printer for over currents, short circuits and earth faults, the building
installation should be equipped with an automatic breaker double pole of 20 A and an earth leakage
switch of 300 mA.
Environmental Recommended
working
environment
Temperature: 23°C
Humidity: 55%, without condensation
Operational
conditions
Temperature: 20°C - 30°C
Humidity: 40% to 65%, without condensation
Rate of change Temperature: No more than 2°C per hour
Humidity: No more than 5% per hour
Storage
environment
Temperature: 4°C to 50°C
Humidity: 40 to 80%, without condensation (When ink has been
discharged.)
Notes
Avoid the following temperature and humidity conditions. Otherwise, printed images may
appear differently from what you expect:
± Places where sudden changes in temperature and humidity are expected, even though the
condition is within the range written above.
± Places where direct sunlight or excessive lighting are expected.
± Places where air conditioners blow directly.
MUTOH recommends that the printer should be installed where air conditioning can be
adjusted easily.