User`s guide

Spitfire 100 Extreme series printers  Users Guide
19 AP-75194 - Rev. 2.2
2.1.2 Rear
N° Name Function
1 Interface connector This is the connector to which the interface cable is connected
2 AC inlet This is the inlet interface to which the power plug is connected
3 BIS - CLIB To connect the optional Bulk Ink System
4 BIS - Sensors
To connect the sensor cable of the optional Bulk Ink System with
the printer
5 Insertion slot Network card installed. To connect the network cable
6 Hard disk slot For the hard disk
7 Waste bottle connector To connect the waste bottle sensor cable
8 Foot switch connectors
To connect the footswitches to lower or higher the pressure
rollers