User`s guide

Spitfire 100 Extreme series printers  Users Guide
177 AP-75194 - Rev. 2.2
Step 3 : Move the carriage close to the capping station. Warning: if you feel obstruction, turn-up the head-
height slide-gear up. The carriage is probably obstructed by the pressure rollers.
Step 4 : When the carriage is above the capping-station, turn back the head-height slide-gear. Make sure
the arrow is in the DOWN-position
Step 5 : Move the carriage to the utter most right position. Make sure the slide gear is not blocking.
Step 6 : To protect the print heads, turn the small brass gear counter clockwise. The capping station will
suddenly move upwards. Just continue to turn until you cannot go further.
Step 7 : Verify if the carriage is properly capped. Try to move the carriage. If it is properly capped, it
should not be possible. Now your machine is temporarily protected until the technical issue is
resolved.