User`s guide
Spitfire 100 Extreme series printers Users Guide
173 AP-75194 - Rev. 2.2
7.3.3 Data error display and solutions
Following are data errors and possible solutions during printer operations.
Data errors are displayed when a communication error occurs between computer and printer.
If data error occurs, the following error messages are displayed and the printer stops.
Solve the problem to delete the error message and restart the printer.
N° Message Descriptions Solution
1 Online status I** Error [ ] An error has occurred
while receiving data.
Confirm the communication condition
between computer and printer.
Notes
*** in error messages are code numbers indicating what kind of error occurred.
7.3.4 Command error display and solutions
Following are command error descriptions and possible solutions during printer operations.
Command errors are displayed when an error has occurred while converting the command data sent from
computer to printer.
If a command error occurs, the following error messages are displayed and the printer stops.
Solve the problem to delete the error message and restart the printer.
N° Message Descriptions Solution
1 command status MH** Error [ ] Invalid command data has been
sent from computer.
Make sure that the settings of
the computer and the printer
match.
Notes
*** in error messages are code numbers indicating what kind of error occurred.
[ ] may indicate the command code of the error.
For the settings on a computer, refer to the computer's operation manual.