User`s guide

Spitfire 100 Extreme series printers  Users Guide
171 AP-75194 - Rev. 2.2
7.3 ERROR MESSAGES
This chapter explains the messages displayed both when the printer works normally and when an error
occurs, and possible solutions.
7.3.1 Status messages
(1) Displays the operational status (1)
The following operational status is displayed on the first line of the operation panel.
N° Display Solutions
1 Ready to print Waiting for the next operation. (Media has been loaded.)
2 Media End The printer is waiting for the next operation.
(No media has been loaded into the printer.)
3 Receiving The printer is receiving data.
4 Converting The printer is converting data.
5 Printing The printer is printing.
6 Warning Waste Ink Tank Replace the waste bottle.
7 Warning Ink Tube Life Contact the dealer where you bought the printer or MUTOH's technical
support centre.
7.3.2 Message type error display and solutions
The following are the message type error display and solutions.
The following message type errors are displayed when an error occurs while operating the printer.
When one of the following message type error displays appears, the printer may stop operation.
If the printer stops operation, solve the problem to delete the error message and restart the printer.
(1) Error messages regarding media feeding
The following error message is displayed on the first line of the operation panel.
N° Display Descriptions Solutions
1 Undefined media The printer failed to detect the media.
(The printer stops.)
Reload the media.
2 Paper Slant The media was fed at an angle into the printer.
(The printer stops.)
Reload the media.
3 End Of Roll Roll media runs out.
(The printer stops.)
Load new roll media.
4 Cover Open The front cover is open.
(The printer stops.)
Close the front cover.
5 Please Set Media The pressure roller has been raised.
There is no media.
Set the media and lower the
pressure roller.