User`s guide
Spitfire 100 Extreme series printers Users Guide
158 AP-75194 - Rev. 2.2
2. Charge function.
2.1. Start Charging
To load ink or cleaning liquid a charge of ink is needed.
Notes
Always perform a discharge of 15 seconds before loading ink into your machine. Please refer to
the chapter above or to Installing Spitfire Mild Solvent Ink cassettes.
Please follow the steps below to load ink or cleaning liquid into your machine.
Step 1 : Insert the cassettes into the slots according to table below.
OR
Insert in all slots Spitfire Mild Solvent cleaning cassettes to perform a Long Store when you want to ship the
machine or leave the printer unused for more than 5 days.
Step 2 : For example a charge of head 1, 4 and 7 will be performed.
Browse to head 1 with [F2] key. Select
head 1 by pressing the [F1] key.
Browse to head 4 with [F2] key. Select
head 4 by pressing the [F1] key.
Browse to head 7 with [F2] key. Select
head 7 by pressing the [F1] key.
Notes
In case you have selected the wrong head, select the head again. The head number will
disappear from the list.
Current Selection (Head 1,4 and 8) Deselect head 8 by pressing the F1 key again.
Step 3 : Press the [F3] button until Charge is displayed