User`s guide

Spitfire 100 Extreme series printers  Users Guide
147 AP-75194 - Rev. 2.2
6.5.4.20 Re-name menu
To change file name of printing data saved on the hard disk.
Notes
Re-name menu is displayed if a hard disk has been installed
The file name of printing data sent from the computer is always set to "TEMPFILE000".
To save transmitted image data, change the file name to a name of your choice in the Rename
folder before transmitting the next printing data.
Setup items Parameters Description
To-be-changed
file name
Characters you want to change To select characters you want to change by operating
the following keys.
[F1] key: To select characters you want to change
with back feed way.
[F3] key: To select characters you want to change
with forward feed way.
Characters you can use are :
A-Z or 0-9
To select to-be-changed characters by operating
following keys.
[F2] key: Selects to-be-changed characters with back
feed way.
[F4] key: Selects to-be-changed characters with
forward feed way.
- [ENTER] key: Confirms setup value, shifts to the
previous hierarchy menu.
[CANCEL] key: Cancels setup value, shifts to the
previous hierarchy menu.