User`s guide
Spitfire 100 Extreme series printers Users Guide
142 AP-75194 - Rev. 2.2
6.5.4.11 HeaterTest menu
When there is a slight suspicion that one of the heaters is broken, it is possible to perform a heater test. This
will warm up all heaters one-by-one to its default temperature. When the message TEST FINISHED
appears, there are no problems.
6.5.4.12 RemPanel
With this function it is possible to enable or disable remote control. This feature is for future use only! Leave
this setting to its default value, OFF!
6.5.4.13 RemConn
With this function it is possible to view to if you are virtually connected. This feature is for future use only!