User`s guide
Spitfire 100 Extreme series printers Users Guide
141 AP-75194 - Rev. 2.2
6.5.4.9 Cap Cycle menu
Perform a tubing flush every 1 to 24 hours.
Notes
A tubing flush is automatically performed after 10 minutes of idle and before shutting down the
printer.
Setup items Parameters Description
Cap Cycle OFF No tubing flush will be performed
1 24 hours Every 1 24 hours (adjustable) a tubing flush is performed.
- [CANCEL] key: To shift to the previous hierarchy menu.
6.5.4.10 SlantCheck menu
It is possible to perform a slant check after every print. The head will measure where the media is positioned
before and after the print. When the position varies too much, a Slant error will appear. This because this can
affect the print quality, the winding precision and can cause head crashes.
Setup items Parameters Description
SlantCheck Disable Disable slant check function
Enable Enable slant check function
- [CANCEL] key: To shift to the previous hierarchy menu.