User`s guide
Spitfire 100 Extreme series printers Users Guide
137 AP-75194 - Rev. 2.2
6.5.4 Setup Menu 4/7
6.5.4.1 Utility menu
To perform various settings for application functions of products.
Setup items Parameters Description
Utility (1/4) ErrorDisplay To set display method to the operation panel when minor error
occurred.
Power on cleaning Cleaning should be performed automatically when the power is
switched on.
Media width If media detection is not performed for initial media, to set the
width of the media in the tray.
Print and Wipe To wipe while printing, to take care of possible condensation on
the print head nozzle plate.
Utility (2/4) Cover Fan To (de)activate the fans in the top cover.
SmartTop The ideal temperature of the media is near to the preheater. This
area of paper is fed before a print starts to obtain perfect quality3
Auto Cleaning Performs cleaning cycle while printer is idle at the set
temperature.
CapCycle Repeat a TubingFlush after a number of hours
Utility (3/4) SlantCheck To perform a slant check after each printer or not
HeaterTest To test all heaters (A, B, C and D)
RemPanel Accept or decline remote control (for future use only)
Remote connection For future use only.
Utility (4/4) Language For future use only.
Weave Engine Because of the different ink - media behaviour and the different
media compatibility, a specific i² weaving engine is available for
the MS Ultra inks.
Utility (1/4 4/4) - [CANCEL] key: To shift to the previous hierarchy menu.