User`s guide
Spitfire 100 Extreme series printers Users Guide
135 AP-75194 - Rev. 2.2
6.5.3.2 Roll media length menu
To set roll media length.
Setup items Parameters Description
Roll media 1-4 1 m to <30 m>to 99 m To change roll media length by operating the
following keys.
[F2] key: to increase the setup value.
[F4] key: to decrease the setup value.
[ENTER] key: to confirm the setup value
[CANCEL] key: to cancel the setup value
6.5.3.3 Centronics menu
To set communication mode to Centronics interface.
Setup items
Parameters Description
Centronics Centronics To set communication mode to Centronics mode.
<Bi Centro> To set communication mode to Bi-Centronics mode.
- To shift to the previous hierarchy menu.
6.5.3.4 Network setting menu
To make the settings for the network interface.
Notes
The Network Settings menu is displayed if the network interface board has been installed.
Be sure to consult the network administrator before making the settings in the Network
Settings menu.
Setup items Parameters Description
Network (1/1) IP address To set the IP address of the product.
Subnet mask To set the subnet mask of the product.
Gateway To set the IP address of the connected gateway.
Network (1/1) - [CANCEL] key: To shift to the previous hierarchy menu.