User`s guide
Spitfire 100 Extreme series printers Users Guide
133 AP-75194 - Rev. 2.2
6.5.2.20 Cutting position Menu
To set the media cutting position after printing has been finished.
Setup items Parameters Description
Cutting position Standard To cut the media to fit the media width, so that it meets the regulated size.
<Data> To cut the media according to the size of the printing data.
- - Shifts to the previous hierarchy menu.
6.5.2.21 Function setup menu
To perform various settings for processing of printing data.
Setup items
Parameters Description
Function setup CMY K Makes settings for printing method to present black.
Scale Sets the enlargement and reduction ratios for printing data.
- [CANCEL] key: Shifts to the previous hierarchy menu.
6.5.2.22 CMY K menu
To set how to draw black.
Setup items
Parameters Description
CMY K <No> If MH-GL, GL2 are set on the Command Settings menu, be sure to use
CMY (mixed colours) ink.
If RTL-PASS is set, use both CMY (mixed colours) ink and K (black) ink.
Yes Always use K (black) ink.
- To shift to the previous hierarchy menu.