User`s guide
Spitfire 100 Extreme series printers Users Guide
120 AP-75194 - Rev. 2.2
6.5.1.17 Media feed compensation menu
To perform various settings for media feed compensation
Notes
For details of the media feed compensation, refer to "Media feed compensation".
Setup items Parameters Description
Dist.Adj Print1 Performs printing by media feed compensation.
A correction pattern with a width of ± 0.20% (in steps of 0.10 %) is printed
around the centre of the correction value currently set.
Change Changes the media feed compensation value.
The menu changes to the Change Media Feed Correction Value menu.
Print2 Performs printing by media feed compensation (for fine adjustment).
A correction pattern with a width of ± 0.02% (in steps of 0.01%) is printed
around the centre of the correction value currently set.
- [CANCEL] key: Shifts to the previous hierarchy menu.
6.5.1.18 Change media feed compensation value menu
Changes the media feed compensation value.
Setup items
Parameters Description
Change 90.00%-<100.00%>-110.00% Changes the media feed compensation value by
operating the following keys.
[F2] key: to increase the setup value.
[F4] key: to decrease the setup value.
[ENTER] key: to confirm the setup value
[CANCEL] key: to cancel the setup value
Notes
There is also a possibility to adjust the step on the fly, please refer to Operation Panel During
Printing