User`s guide

Spitfire 100 Extreme series printers  Users Guide
118 AP-75194 - Rev. 2.2
6.5.1.13 Heater B Menu
Set the temperature of the Fixer.
Setup items
Parameters Description
Heater B OFF  40°C
(for MS & MS Plus)
OFF  70°C
(for Eco Ultra)
Change fixer temperature by operating the following keys.
 [F2] key: to increase the setup value.
 [F4] key: to decrease the setup value.
 [ENTER] key: to confirm the setup value
 [CANCEL] key: to cancel the setup value
6.5.1.14 Heater C menu
Set the temperature of the Post Fixer.
Setup items Parameters Description
Heater C OFF  50°C Change post fixer temperature by operating the following keys.
 [F2] key: to increase the setup value.
 [F4] key: to decrease the setup value.
 [ENTER] key: to confirm the setup value
 [CANCEL] key: to cancel the setup value