User`s guide
Spitfire 100 Extreme series printers Users Guide
115 AP-75194 - Rev. 2.2
Setup items
Parameters Description
User media 1-8 (1/3) InkDryTime In order to let the ink for the printing dry, the time between the end
of the print and the beginning of the next print is set.
HeadHeight Sets the distance (head height) between the print head and the
media.
Vacuum Sets the intensity of the fans.
Fan Mode To activate ALL the fans or the one under the media.
User media 1-8 (2/3) Thickness Makes the setting on the thickness of the media to be used.
Heater Sets the temperature of the Heater.
Drier Sets the temperature of the Drier.
Fixer Sets the temperature of the Drier.
User media 1-8 (3/3) Post Fixer Sets the temperature of the Drier.
HStatus Checks the temperature of heating elements.
Dist.Adj Performs various settings for media feed compensation.
Type (1/3-3/3) - [CANCEL] key: to shift to the previous hierarchy menu.
6.5.1.7 InkDry menu
Sets the waiting period between the end of operation and the start of next printing in order to let the printed
media dry.
Setup items
Parameters Description
InkDryTime 0 to <30 sec. > to 270 sec. to 60 min. To change the InkDryTime by operating the
following keys.
[F2] key: to increase the setup value.
[F4] key: to decrease the setup value.
[ENTER] key: to confirm the setup value
[CANCEL] key: to cancel the setup value