User`s guide

Spitfire 100 Extreme series printers  Users Guide
113 AP-75194 - Rev. 2.2
6.5.1.3 Test print menu
Setup items Parameters Description
Test print (1/3) SetupPrint Performs setup printing.
NozzleCheck Performs nozzle check printing.
Alignment (UniDir) Performs accuracy adjustment printing in one direction.
Alignment (BiDir) Performs accuracy adjustment printing in two directions.
Test print (2/3) Bi-D400 Print a Bi-Directional adjustment pattern at 400 cps
Bi-D480 Print a Bi-Directional adjustment pattern at 480 cps
Palette printing Performs palette printing.
Maintenance status Maintenance status printing is performed.
Test print (3/3) Dist. Check Print a distance adjustment check pattern.
Only applicable for the 4x4 ink configuration.
Test print (1/3-3/3) - [CANCEL] key: shifts to the previous hierarchy menu.
6.5.1.4 Media set menu
Setup items Parameters Description
Media setting Type Sets the media type used for test printing.
Top feed Sets the amount of media to be fed when printing begins. Make this
setting when using roll media.
Media cut The method of cutting the media after printing is set here.
- [CANCEL] key: to shift to the previous hierarchy menu.