User`s guide
Spitfire 100 Extreme series printers Users Guide
112 AP-75194 - Rev. 2.2
In the ChipStatus menu it is possible to load ink volume to the SmartChip management system or to ink
volume which is left. Please refer to Working with Mutohs SmartChip Management system all the
necessary information.
6.5.1.2 Origin set menu
Sets the printing start position (origin) for printing data.
Use this when you want to re-print to blank area of the printed media by changing the layout of the printing
data.
Setup items Parameters Description
Origin setting L: Media feed value
W: Print head movement
value
(Unit: mm)
Changes the print head position and media feed
amount by operating the following keys.
[F1] key: Feeds media forward.
[F2] key: Moves the print head to the left.
[F3] key: Feeds media backward.
[F4] key: Moves the print head to the right.
[ENTER] key: Determines the setup values then
returns to the previous hierarchical menu.
- [CANCEL] key: shifts to the previous hierarchy menu.
Notes
When printing from the data on the hard disk, the printing will start from the same start position
as when the printing data was written, regardless the home position setting value.
The origin setup menu automatically ends without pressing any key for a certain period, to
avoid drying the print head.