User`s guide

Spitfire 100 Extreme series printers  Users Guide
107 AP-75194 - Rev. 2.2
6.4.2 Manual Media Cutting
This section explains how to cut the media manually.
When "Manual" is set in the media cut menu, the media can be cut manually.
Cut the media according to the following procedure.
Step 1 : Make sure that the MEDIA SET lamp is off.
Notes
After printing, the media is automatically transferred to the media cutting position.
Do not use the cutting blade when media retainers have been installed.
Step 2 : Press the [F1] key.
Shift to the cut and feed menu.
Step 3 : Feed media to the knife guide (1) according to the procedure in "Feeding media".
Step 4 : Cut (2) the roll media