User`s guide

Spitfire 100 Extreme series printers  Users Guide
105 AP-75194 - Rev. 2.2
6.3.2.5 Menu and
During printing, extra information about the current job is available. Use the menu UP and DOWN keys to
browse through these menus.
1) Menu 1/4
Standard menu during printing.
2) Menu 2/4 and 3/4
Two situations are possible:
Length information is not provided with the job. The printer cannot know progress and remaining time.
However, size of the already printed area is shown.
Length information is provided; the printer calculates progress and remaining time. The correctness of
this depends on the correctness of the provided information.
4) Menu 4/4
This menu displays the important print parameters provided by the RIP software.