Specifications

Spitfire 100 Extreme series printers – Operation Instructions

CHAPTER 6: PRINTER MENU

AP-77200, Rev. 1.1, 05/07/07

Printer Menu

6.4.2 Manual Media Cutting

This section explains how to cut the media manually.

When "Manual" is set in the media cut menu, the media can be cut manually.

Cut the media according to the following procedure.

Step 1 : Make sure that the MEDIA SET lamp on the operation panel is off.

Notes

• After printing, the media is automatically transferred to the media cutting position.

• Do not use the cutting blade when media retainers have been installed.

Step 2 : Press the [F1] key on the operation panel.

¾ Shift to the cut and feed menu.

Step 3 : Feed media to the desired position according to the procedure in "Feeding media".

Step 4 : Press the [F1] key on the operation panel.

¾ The following messages are displayed on the operation panel.

Step 5 : Cut the roll media.

Step 6 : Press the [ENTER] key of the operation panel.

¾ The unit enters the normal status.