Specifications

Spitfire 100 Extreme series printers – Operation Instructions

CHAPTER 6: PRINTER MENU

AP-77200, Rev. 1.1, 05/07/07

Printer Menu

6.3.2.2 [F2] - Cleaning

While printing, it could be possible that some nozzles drop out, in that case, perform a little, normal or

powerful cleaning.

Please follow the steps below to perform a cleaning.

When there are some missing nozzles, a cleaning should be done. Depending on the quantity of missing

nozzles and which head, a little, normal or powerful cleaning on head 1-2, head 3-4 or ALL could be done.

Step 1 : Press the [F2] key of the operation panel.

I) To shift to the cleaning menu.

Step 2 : Press the [F1] key or the [F2] key on the operation panel.

I) The product will perform following operations:

Setup items Key name Parameters Description

F1 ALL, Head 1 – Head 2 Clean ALL heads or head couple one or two Cut & Feed

F2 Little, normal, powerful Set the intensity of a cleaning

Step 3 : Press the [ENTER] key to start the requested cleaning.

6.3.2.3 [F3]

- Adjust heaters

While printing, the heater values can be changed. For example: when noticing cockling.

Please follow the steps below to adjust the heater temperatures.

Step 1 : Press the [F3] key

Step 2 : Following screen will be displayed

Step 3 : Change the value of one or more heaters or switch them all off.

Notes

For more details about heater adjustment, please refer to “Controlling the heater elements on the Spitfire

Extreme printer”