Specifications

Spitfire 100 Extreme series printers – Operation Instructions

CHAPTER 6: PRINTER MENU

AP-77200, Rev. 1.1, 05/07/07

Printer Menu

6.2 OPERATION PANEL IN STANDBY MODE

This section describes functions operated on the operational panel when the printer is in the normal status.

Notes

For information of the name and function of each key, refer to "Operation panel".

6.2.1 [F1] – Feeding, Cutting media and Step Adjust

When you want to feed media forward or backward, follow the steps below:

Step 1 : Verify the following regarding the condition of the printer.

I) It is not currently printing

Step 2 : Press the [F1] key of the operation panel.

I) To shift to the Cut&Feed menu.

Step 3 : Press the [F3] key or the [F4] key on the operation panel.

I) The product will perform following operations:

Setup items Key name Parameters Description

F1 Cut Cut media

F2 Dist.Adj. Set step

F3 Forward Feeds media forward.

Cut & Feed

F4 Backward Feeds media backward.

Notes

If "Take-Up Roll" is set in the media detection setup menu, the product will not operate even if the [F4] key

has been pressed.

6.2.2 [F2] - Cleaning the heads

Step 1 : Press the [F2] key on the operation panel.