Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 5: PREPARATIONS BEFORE PRINTING
64
AP-77200, Rev. 1.1, 05/07/07
Before Printing
5.2.3 How to determine the step
To determine the correct step, a step adjustment file is implemented in the firmware.
In the test print menu 2/2, via the [F3] key, a pattern can be printed.
To evaluate the print, you should look for gaps or overlaps between the different passes (1-4). The direction
of the adjustment (increase or decrease the step adjust value) is the easiest to check in the X-rows. To
check the quality, the Y row should be the standard.
◄
◄
The step in this pattern is too
small, you can see an overlap.
Which means that you have to
increase the step.
The step in this pattern is too big,
you can see a gap. Which means
that you have to increase the
step.