Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 4: PERIODICAL MAINTENANCE
54
AP-77200, Rev. 1.1, 05/07/07
Maintenance
4.1.3.6 Replacing the spitting box mesh set.
This should be done every half year
.
Notes
Use gloves and tweezers to change the mesh in the flushing box.
Step 1 : Power ON the printer and go to the “M.Maint.-Menu”. The carriage will move to the manual
cleaning area on the left of the machine.
Step 2 : Open the front cover.
Step 3 : Remove the spitting box mesh with a little screwdriver. Replace the old set (2) of spitting meshes
with the new ones (in the user’s kit 6 months).
1
Spitting box mesh
2
Gloves
Step 4 : Install the new mesh in the flushing box.
Step 5 : Close the front cover.
Step 6 : Lock the head by pressing the [ENTER] key.