Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 4: PERIODICAL MAINTENANCE
52
AP-77200, Rev. 1.1, 05/07/07
Maintenance
4.1.3.3 Replacing the absorbent behind the maintenance station.
This should be done every month
.
Step 1 : Power ON the printer and go to the “M.Maint.-Menu”. The carriage will move to the manual
cleaning area on the left of the machine.
Step 2 : Put on some gloves and tilt out the old absorbent and replace it by a new one.
4.1.3.4 Changing
the absorbent under the waste bottle
This should be done every 3 months.
Step 1 : Lower the waste bottle holder and remove waste bottle.
Step 2 : Replace the sponge under the waste bottle.
Step 3 : Raise the waste bottle holder.