Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 4: PERIODICAL MAINTENANCE
51
AP-77200, Rev. 1.1, 05/07/07
Maintenance
4.1.3.2 Replacing the pump tubings.
This should be done every month
.
Step 1 : Before replacing the tubings, be sure to perform a tubing flush and power OFF the machine.
Step 2 : Cover the flour with a towel because it is possible that some fluid leaks out of the nipples.
Remove the cap from the pump and remove tubing.
Step 3 : Replace the old tubing with the new one and reinstall the blue cap.
When replacing the tubings, put the tubing 3 to 5 times on the nipples.
Notes
Be sure that the tubings are not wrinkled.