Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 4: PERIODICAL MAINTENANCE
50
AP-77200, Rev. 1.1, 05/07/07
Maintenance
4.1.3 Other maintenance
4.1.3.1 Replacing
the wipers
This should be done every month
.
Please follow the procedure below.
Step 1 : Power ON the printer and go to the “M.Maint.-Menu”. The carriage will move to the manual
cleaning area on the left of the machine.
Step 2 : Remove the old wipers with a pair of tweezers
Step 3 : Before inserting a new wiper, moisten the wiper with Spitfire Cleaning Liquid.
Step 4 : Insert the moistened wiper with a pair of tweezers.
Be sure to insert the wiper correctly as shown below:
When standing in front of the machine.
Be sure that the wiper clicks in the wiper holder!
Notes
Do not touch the wipers with your bare hands to avoid fat or dirt get in contact with the wipers and
automatically the nozzle plate. Use a pair of tweezers to avoid this. Clean wipers with appropriate cleaning
liquid in case of dirt