Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 4: PERIODICAL MAINTENANCE
49
AP-77200, Rev. 1.1, 05/07/07
Maintenance
Step 5 : Remove the spitting box mesh with a little screwdriver and put it in a little bowl with Spitfire
Cleaning Liquid for a week.
1
Spitting box mesh
2
Gloves
Notes
• Also clean the mesh with Spitfire Cleaning Liquid
when it is saturated or bended. Because this could
result in ink drops on the print.
• Do not touch the mesh, only the metal border.
• When cleaning the mesh be careful not to bend it.
• When cleaning the mesh, be sure no dust particles
are left behind.
• Make use of the optional mesh shaker (MY-60540)
Step 6 : In case this is the first time, replace the mesh with the one in box 4. In case this is the second,
third… time, replace the mesh with the one which already lay a week in the cleaning liquid.
Please be careful to replace the mesh in the good position.
Step 7 : Close the front cover and strike the ENTER key when done. The carriage will automatically go to
its home position.
Step 8 : Now perform the daily maintenance.