Specifications

Spitfire 100 Extreme series printers – Operation Instructions

CHAPTER 4: PERIODICAL MAINTENANCE

AP-77200, Rev. 1.1, 05/07/07

Maintenance

Step 4 : Close the front cover and strike the ENTER key to let the carriage move back to its home position

Step 5 : Perform a tubing flush (F2 in Menu 6/7)

Step 6 : Open the front cover when message below is displayed.

Step 7 : Use a pipette to flush the caps with Spitfire Cleaning Liquid.

Step 8 : Flush the caps until the colour of the mousse in the cap does not change anymore. Be sure to

wet the edges of the caps also with Spitfire Cleaning Liquid.

Step 9 : To stop the tubing flush cycle press enter.

Step 10 : Check if ink has been spoiled on the edges of the caps. If so, clean the edges with the cleaning

swab and if necessary use some Spitfire Cleaning Liquid. If not clean them every two days. Be

careful not to break the edges.

Step 11 : Close the front cover.