Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 3: BASICS
42
AP-77200, Rev. 1.1, 05/07/07
Basics
Step 6 : Insert Spitfire Mild Solvent ink Cassettes, and Stabilizer liquid in case of 2x6, according to the ink
configuration label and charge for 3 minutes
¾ Go to the Ink Manager Menu > Charge/Discharge, set the following parameters in this order.
Handle following order
1. Select ALL with [F2] key
2. Press F1 to select ALL heads
3. Select Charge with [F3] key
4. Press the F4 key to START cycle
5. Set 180 seconds with [F2] – [F4] and
press ENTER
Step 7 : A timer will start on the display.
¾ When finished, the printer will go to its status screen automatically.
Step 8 : Perform a NozzleCheck to be sure all nozzles are present.