Specifications

Spitfire 100 Extreme series printers – Operation Instructions

CHAPTER 3: BASICS

AP-77200, Rev. 1.1, 05/07/07

Basics

3.8.2 Starting up after a LongStore.

Please follow the procedure below to start up your Spitfire 100 Extreme after a LongStore.

Step 1 : Go to menu 6/7 and choose “TubingFlush”.

Step 2 : Moist (1) the edge of the caps (2) with Spitfire Cleaning Liquid to guarantee that the ink cycle is

airtight.

Step 3 : Press the ENTER key when finished.

Step 4 : Remove the Spitfire Cleaning Liquid cassettes and manually start a discharge cycle for 15

seconds.

¾ Go to the Ink Manager Menu > Charge/Discharge > set the following parameters in this order.

Handle following order

1. Select ALL with [F2] key

2. Press F1 to select ALL heads

3. Select Discharge with [F3] key

4. Press the F4 key to go to next menu

5. Set 15 seconds with [F2] – [F4] and

press ENTER

Step 5 : A timer will start on the display showing 0 min.

¾ When finished, the printer will go to its status screen automatically.