Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 3: BASICS
39
AP-77200, Rev. 1.1, 05/07/07
Basics
3.7.2 Leave your printer IDLE during night.
In case you want to leave your printer IDLE during the night for some reason, a special procedure should be
followed.
Step 1 : Before leaving the office:
a. Set your AutoClean on 6 hours and powerful. Every 6 hours, a powerful cleaning will be
performed.
b. Set your CapCycle to 7 hours. An hour after the cleaning, a tubing flush will be performed.
Step 2 : When arriving in the office, be sure to:
a. Perform a tubing flush with cleaning (Please refer to “Daily Maintenance”)
b. Perform a nozzle check
c. Depending on the amount of lost nozzles, perform a normal or powerful cleaning until all
nozzles are back.
d. Switch off the CapCycle and AutoClean feature.