Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 3: BASICS
31
AP-77200, Rev. 1.1, 05/07/07
Basics
3.3.3 Replacement procedure
Follow the steps below to replace ink cassettes.
Step 1 : If the printer is switched on, make sure of the following
• Printing or other operations are not performed.
• Make sure that the display on the operation panel shows the normal state.
• The MEDIA SET light on the operation panel goes off.
Step 2 : Remove the ink cassette from the ink cassette slot.
Step 3 : Take the new ink cassette from its package.
Step 4 : Insert the new Spitfire Mild Solvent ink cassette.
Step 5 : Make sure that
• The display on the operation panel returns to normal status
• The LED on the LED bar lights green (Present)