Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 3: BASICS
21
AP-77200, Rev. 1.1, 05/07/07
Basics
3 BASICS
3.1 SWITCHING THE POWER ON/OFF
3.1.1 Switch ON the power of the printer.
Switch the power of the unit ON according to following procedure.
Step 1 : Press the [POWER] key of the operation panel, to turn the unit ON.
¾ The POWER lamp of the operation panel will light (green).
Step 2 : The unit will start initial start-up operations.
Step 3 : After finishing initial start-up operations, the unit will enter the normal
operating condition.
3.1.2 Switch OFF the power of the printer.
Switch the power of the unit OFF according to the following procedure.
Step 1 : Verify the following regarding the operational condition of the unit.
¾ There is no printing operation being performed.
¾ The operation panel is in a normal status.
Step 2 : Press the [POWER] key of the operation panel to switch the unit OFF.
Step 3 : Following message is displayed for 3 seconds on the operation panel.
Step 4 : The product will perform the power OFF operation.
¾ Following message is displayed on the operation panel.
¾ All lamps and the LCD of the operation panel will switch OFF.
¾ The product will automatically switch the power OFF after performing a tubing flush.
3.1.3 Switch ON-OFF the power of the winding system.
There is a switch located on the power supply box of the winding system. Its status is marked with “O” & “I”.
“I” Switched ON Power LED on control panel of winding system will light up
“O” Switched OFF Power LED on control panel of winding system will not be lid.