Specifications

Spitfire 100 Extreme series printers – Operation Instructions
CHAPTER 2: PRODUCT OVERVIEW
20
AP-77200, Rev. 1.1, 05/07/07
Product Overview
2.3 INSTALLATION REQUIREMENTS
An Authorized Mutoh technician will install your unit and will make the printer ready for its first job. A room
which meets the environmental and space conditions should be foreseen by the user.
Dimension machine
Area (printer only) 3,915 m² (42 ft²)
Without media ± 500 kg (1100 Lb) Total weight
machine With media ± 600 kg (1430 Lb)
Maximum load on one wheel 200 kg (440 Lb)
Printer Winding System
Voltage
AC 220-240V AC 100-120V / AC 220-240V
Frequency 50Hz±1Hz 60Hz, 50Hz±1Hz
Electrical
Capacity AC220V-240V : 12A AC100V-120V : 0.3 A
AC220V-240V : 0.13 A
Maximum capacity 2500 Watt
In order to protect the printer for over currents, short circuits and earth faults, the building
installation should be equipped with an automatic breaker double pole of 20 A and an earth leakage
switch of 300 mA.
Recommended
working
environment
Temperature: 23°C
Humidity: 55%, without condensation
Operational
conditions
Temperature: 18°C-27°C
Humidity: 40% to 65%, without condensation
Rate of change Temperature: No more than 2°C per hour
Humidity: No more than 5% per hour
Environmental
Storage
environment
Temperature: 4°C to 50°C
Humidity: 40 to 80%, without condensation (When ink has been
discharged.)
Install the product on a flat surface that fulfils following conditions:
Recommended space
A = 1 meter
B = 2 meter
C = 2.5 meter
D = 2 meter
E = 3 meter