User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
97 AP-75330  Rev. 1.0  14/01/09
5.4.4.2 ErrorDisplay menu
To set display method to the operation panel when minor error occurred.
Setup items Parameters Description
ErrorDisplay
<OFF>
No ErrorDisplay.
ON
To perform ErrorDisplay.
-
To shift to the previous hierarchy menu.
Refer to Utility menu
5.4.4.3 Media detection menu
When media has been initialized, to perform detection of width and edge of the media.
Setup items Parameters Description
media detect
<Normal>
To perform media detection automatically.
OFF No media detection.
Take-up mechanism
Make this setting when using the optional take-up
system.
RollFeed
Make this setting when using the Unwinder / winder
100. (Standard with your Digital Transfer Printer.)
-
 [CANCEL] key: to shift to the previous hierarchy
menu.
Refer to Utility menu
Notes
WHEN SETTING "TAKE-UP MECHANISM", THE FOLLOWING LIMITS ARE APPLIED TO THE OPERATION OF THE
PRODUCT.
± FOR INITIAL MEDIA, ONLY THE MEDIA WIDTH IS DETECTED.
± UNDER NORMAL CONDITIONS, MEDIA CANNOT BE FED BACKWARD.
± THE MEDIA CANNOT BE MOVED FORWARD OR BACKWARD FROM THE ORIGIN SETTING MENU.
± THE SETTINGS IN THE MEDIA CUT MENU ARE DISABLED, AND THE SETTINGS ARE CHANGED TO "OFF".
(REFER TO MEDIA CUT MENU)