User`s guide
Users Guide Viper Extreme
CHAPTER 5: Printer menu
93 AP-75330 Rev. 1.0 14/01/09
5.4.3.3 Centronics menu
To set communication mode to Centronics interface.
Setup items Parameters Description
Centronics
Centronics
To set communication mode to Centronics mode.
<Bi Centro>
To set communication mode to Bi-Centronics mode.
-
To shift to the previous hierarchy menu.
Refer to Setup menu
5.4.3.4 Network setting menu
Notes
The network settings menu is available if a network interface board is installed.
Be sure to consult the network administrator before making the settings in the Network Settings menu.
Setup items Parameters Description
Network (1/2)
IP address
To set the IP address of the product.
Refer to IP address menu
Subnet mask
To set the subnet mask of the product.
Refer to Subnet mask menu
Gateway
To set the IP address of the connected gateway.
Refer to Gateway menu
Network (1/2) -
[CANCEL] key: To shift to the previous hierarchy menu.
Refer to Setup menu