User`s guide

Users Guide Viper Extreme
CHAPTER 5: Printer menu
85 AP-75330  Rev. 1.0  14/01/09
5.4.2.7 Repeat printing menu
Notes
This setting is often used when printing onto textiles.
Only use non-stretchable, tight woven textiles.
Setup items Parameters Description
Repeat
Count
To set the number of repeats per line of printing.
Refer to Repeat times menu
Interval
To set interval time for the repeat print.
Refer to Interval time menu
-
[CANCEL] key: To shift to the previous hierarchy
menu.
Refer to Setup menu
5.4.2.8 Repeat times menu
To set the number of repeats per line of printing.
Setup items Parameters Description
Times <Once> to 99 times
Operate the following keys to change repeat times:
 [F2] key: Increases the setup value.
 [F4] key: Decreases the setup value.
 [ENTER] key: To confirm the setup value, to shift to
the previous hierarchy menu.
 [CANCEL] key: To cancel setup value, to shift to the
previous hierarchy menu.
Refer to Repeat printing menu