User`s guide
Users Guide Viper Extreme
CHAPTER 5: Printer menu
76 AP-75330 Rev. 1.0 14/01/09
5.4.1.9 Vacuum menu
Notes
It could happen that digital transfer media starts to cockle when the ink comes into contact with the
media. To minimize the cockling, please use this mode to suck the media onto the print platform.
The default setting for this unit is set to HIGH.
Notes
We recommend you to select HIGH in the vacuum menu. Only use Low or Medium when using
sheet media.
Setup items Parameters Description
Vacuum
Low The suction of the media to the print platform is low.
Medium The suction of the media to the print platform is medium.
High
The suction of the media to the print platform is high. Use
this setting when media is cockling.
-
After setting, shift to the previous hierarchy menu.
Refer to User media menu
5.4.1.10 Thickness menu
Setup items Parameters Description
Thickness 50µm-<100µm>-1500µm
Operate the following keys to change media
thickness.
[F2] key: to increase the setup value.
[F4] key: to decrease the setup value.
[ENTER] key: to confirm the setup value and to shift
to the previous hierarchy menu.
[CANCEL] key: to cancel the setup value and to
shift to the previous hierarchy menu.
Refer to User media menu
Notes
It is very important to set the correct media thickness to obtain good printing quality.