User`s guide
Users Guide Viper Extreme
CHAPTER 5: Printer menu
75 AP-75330 Rev. 1.0 14/01/09
5.4.1.7 Ink dry time menu
Set the waiting period between the end of operation and the start of next printing in order to let the printed
media dry.
Setup items Parameters Description
InkDryTime
0 to <30 sec. >
to 270 sec. to
60 min.
Operate the following keys to change the InkDryTime.
[F2] key: Increases the setup value.
[F4] key: Decreases the setup value.
[ENTER] key: Confirms the setup value, shifts to the previous
hierarchy menu.
[CANCEL] key: Cancels the setup value, shifts to the previous
hierarchy menu.
Refer to User media menu
5.4.1.8 Head Height menu
Set the distance (head height) between the print head and the media.
According to the media thickness, 3 head height levels are available.
Setup items Parameters Description
HeadHeight
Low This setting makes a distance of 1.2 mm between the head and the media.
Middle This setting makes a distance of 2.2 mm between the head and the media.
High This setting makes a distance of 4.0 mm between the head and the media.
- Refer to User media menu
Notes
Set the height of the head in relation to the amount of cockling of the unit.
± Always try to work with the lowest head height to obtain the best printing quality.
± When the print heads touch the media while printing, set the head height one setting higher.